THIS PHONE COSTS AROUND RS 13000-14000.
Nokia typically isn't well known for its
touchscreen pannel...
BUT...
this HOT LOOKING AeOn
concept is simpally stunning.
Full front surface of the is absolutely TOUCHSCREEN with the exception of nokia stripe across the centre.
Touchscreen display bring up the digits , MP3 player controls and full color graphics depends upon your needs..
AS IT IS A CONCEPT PHONE ITS RELEASING DATE, PRICE IS OUT OF KNOWLEDGE.
recommended softwares:
- AVG - Our most recommended anti virus software.-
Be sure to regularly update your 'virus definitions' e.g. once per week
2. Install quality firewall :
There are many firewalls available, some good, some bad. MY recommendation is the FREE zone alarm. They provide a paid version with extra tools (of course), but we think the free firewall-only option is fine. Its getting harder on their site to see the free one (so look carefully!). At time of writing, go here, scroll down and click the free option. If the above link doesn't work, start looking from the Zone Alarm front page
3.Install an anti-spy ware application :
There are many available, some good, some bad. Our recommendation is the FREE: Spybot - Search & Destroy. Download here, and find Spybot info here.
To use it, you need to:
4.Download and install the ihound Software for each configured device.
5.For a list of supported devices, you can see here
6.You can also use JustStolen
The plastic covers on cell phones are fairly tight, but water can enter the phone over time. But this time may be quite short - 20 seconds or less. So grab your phone quickly.
Cutting power to your phone is a crucial first step in saving it. Many circuits inside the phone will survive immersion in water provided they are not attached to a power source when wet.
Some or all of your valuable contacts (along with other data) could be stored on your SIM. To some people this could be more worth saving than the phone itself. SIM cards survive water damage well, but some of the following steps are unnecessary i.e. don't heat it. Just pat it dry and leave it aside until you need to connect your phone to your cellular network.
Obviously you need to remove as much of the water as soon as possible, so you can to prevent it from getting into the phone. Use a towel or paper towel to remove as much of the water as possible
Since you do not want to ruin your phone or lose all of the numbers in your phone book, you need to allow the phone to dry. Also, ringtones and graphics stay with the phone - not the SIM. Don't try putting the battery back on to see if it works as this would risk damaging the phone with a short circuit. Leaving your phone in a bowl of dry rice will help to expedite moisture evaporation.
Apply enough heat to your phone to cause the water to evaporate without water-logging your digital screen. One of the best things you can do to save a cell phone is to set it on the back of your computer monitor or TV screen over the heat vents. This is usually the perfect amount of heat to fix your phone. The convection action of the heat vents will help carry away the moisture in your phone. Leave the phone on the heat for at least 2-3 days.
After you have waited 3 days, make sure everything is clean and dry looking and re-attach the battery to the phone and see if it works. If your phone does not work repeat step 4. If it still won't work, try taking your cell phone to an authorized dealer. Sometimes they can fix it.
else thrash ur cellphone and keep the city clean..
1.Power off the computer and make sure that it is unplugged.
Open up your computer case. You need physical access to the motherboard to complete this procedure.
2.Find a circular, (mostly) silver metallic object on the motherboard. This is the CMOS battery.
CAREFULLY remove the CMOS battery and leave it out for about 120- 180 seconds. This will flush the CMOS memory which stores the BIOS password and all other configuration. (See Warnings)
3.Set the battery back into place and power on the computer.
The computer should then warn you that the CMOS configuration could not be found. You can either reconfigure it yourself or restore defaults. Restoring the default configuration should be fine.
4.You will notice that the BIOS password has been cleared and you can boot without it. You may reset the BIOS password to something else by going into the BIOS configuration and setting a new User Password.
